Skip to content
Official MCP RegistryListed

TerraLab

Part ofTerraLablisted on 2 directories

Geodata for any place, inside your agent: map data, terrain, routes, satellite images, GIS files.

First seen 11 Oct 2026. Evidence as of 17 Nov 2026.

12
Tools
From an anonymous probe
1
Source listings
Each with its own history
19
Recorded changes
Since first seen

Tools

ToolDescriptionBehaviour
convert_coordinatesUse this when the user gives coordinates and wants them in another system or format: decimal degrees, degrees minutes seconds (GPS), UTM, MGRS, Lambert 93 (EPSG:2154, the French grid) or an EPSG code, for example Lambert 93 to WGS84 latitude and longitude, or GPS coordinates to UTM. The format of each line is detected automatically, including "lat, lon" or "lon, lat"; for a national grid the numbers alone cannot reveal (Dutch RD, Swiss LV95, British National Grid, Polish 1992, Belgian Lambert 72) or a UTM zone given apart from the numbers, set source_epsg. Converts one point or up to 1,000 lines to decimal degrees, DMS, UTM and MGRS (1 m), and optionally to an EPSG code, shows them on a map, and recommends the local projected CRS for working in QGIS. Returns a CSV and a GeoJSON download (both open directly in QGIS). Needs actual coordinates: to explain what a CRS, a projection or an EPSG code is, or to write conversion code, answer without this tool. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file.Read-only
extract_open_dataUse this when the user wants map data or GIS layers for a place or an area anywhere in the world, such as the data of a city, a town, a neighbourhood or a site: buildings, roads, addresses, points of interest (shops, schools, pharmacies), land use, waterways, water areas, railways, transit stops, power lines, protected areas, administrative divisions and boundaries, places or routes. The area is a place, a place with a radius, or a bbox. Returns the count, sample attributes, a map and a file (GeoJSON, KML, Shapefile zip or CSV) with its licence, ready for QGIS. One extract holds at most 20,000 features: for a town centre use a radius of about 1 km, for dense cities less. For one kind of place (pharmacies, schools, supermarkets) or land (forest, vineyards), set kind: the limit then counts that kind only, so a whole city usually fits. For administrative boundaries (a commune, the departments of a region, a country) use divisions with level and the place name, without a radius. One theme per call: extract the layers the user asks for; when they ask for the data of a place without naming a layer, or what data exists for a project, name the useful themes and let them choose before extracting several. Data: Overture Maps and OpenStreetMap. Never use the user's current location unless they type it. Give the place as the user names it (place name, address or coordinates): this tool locates it, so find_places is not needed first. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file: list every format the user needs in formats, in this one call.Read-only
find_placesUse this when the user wants the coordinates (latitude and longitude, GPS position) of an address or place name, the address at given coordinates, or wants places or addresses put, pinned or plotted on an interactive map, including a whole list of addresses (up to 100, pasted or as CSV with an address column). Worldwide, OpenStreetMap data; French street addresses are refined with the national address base. Shows the points on a map; for a list, gives a CSV with latitude and longitude added (opens directly in QGIS as a delimited text layer), plus KML and GeoJSON. Not for weather, opening hours, reviews, driving or travel directions and times, property prices, or general knowledge about a place (history, facts, travel advice): answer those without this tool. Never use the user's current location unless they type it. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file.Read-only
french_building_heightsUse this when the user asks how tall the buildings are around an address or in a small area in France: height in metres per building, floors, main use, year built and ground altitude, from IGN BD TOPO. The area is a place with a radius (default 150 m) or a bbox, at most 0.6 km². Shows the buildings on a map with a height summary (count, median, tallest) and GeoJSON, KML, Shapefile zip or CSV downloads. France only (mainland, Corsica and overseas departments). Never use the user's current location unless they type it. Give the place as the user names it (place name, address or coordinates): this tool locates it, so find_places is not needed first. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file: list every format the user needs in formats, in this one call.Read-only
french_parcelUse this when the user asks which cadastral parcel (parcelle cadastrale, plot of land) is at an address or point in France, its reference (commune, section, number) and cadastral area, or which local urban plan zone applies there (PLU or PLUi zoning: zone label, type such as U, AU, A or N, and the plan document), for example before buying land or a house or before a building project. Reads the open data of the French cadastre (DGFiP) and of the Géoportail de l'Urbanisme. Shows the parcel on a map with GeoJSON and KML downloads. France only. Never returns owners or property sales. The zone is not a building permit decision. Never use the user's current location unless they type it. Give the place as the user names it (place name, address or coordinates): this tool locates it, so find_places is not needed first. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file.Read-only
get_elevationUse this when the user asks how high a place is (altitude, height above sea level), wants an elevation profile or the climb between places (a hike, a ride or a road up a mountain: elevation gain and loss, highest and lowest points, cross-section), or asks about the terrain of an area, anywhere in the world: a DEM, relief or hillshade for QGIS, contour lines (topographic lines) and how steep or flat it is (slope). Place names work directly, for example a town and a summit. Reads the values from Copernicus DEM, a 30 m surface model of the whole world, and returns the numbers, a profile chart, the path or contours on a map and files. mode "point": up to 100 points. mode "path": 2 or more points, sampled into at most 500 samples. mode "area": a bbox, a place or a place with a radius, of any size: returns the DEM clipped to the area as a GeoTIFF (30 m, coarser for very large areas), a hillshade GeoTIFF and a slope GeoTIFF, which open directly in QGIS; for areas up to about 10 x 10 km it also returns contour lines (interval_m between lines; Shapefile, GeoJSON, KML) and slope statistics, so one call answers how steep a site is. Not for routes or travel times. Needs a place, coordinates or an area: to explain what a DEM, a DSM or contour lines are, answer without this tool. Never use the user's current location unless they type it. Give the place as the user names it (place name, address or coordinates): this tool locates it, so find_places is not needed first. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file.Read-only
get_routeUse this when the user wants the driving, walking or cycling route between 2 to 25 places or points in order: the distance and travel time along the roads and paths, per leg and in total, and the route line. Computed by Valhalla on the TerraLab server from the OpenStreetMap road network, with each road's typical speed. Options avoid tolls, highways or ferries. Returns the figures (distance_m, distance_km, duration_s, duration_min), a map of the line and GeoJSON, KML, GPX, Shapefile zip and GeoPackage downloads. Not for a straight-line distance (use measure), live traffic, departure-time travel times, public transport or turn-by-turn navigation. Never use the user's current location unless they type it. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file.Read-only
get_satellite_imageUse this when the user wants a satellite image or aerial photo of an area as a file for QGIS: a recent true colour picture, a false colour image, or NDVI to see vegetation, crops or forest health. The area is a bbox, a place, or a place with a radius. Two sources: IGN orthophotos (France only, about 0.5 to 1 m pixels, areas up to 2 x 2 km; the default inside metropolitan France for true colour) and Copernicus Sentinel-2 L2A (worldwide, 10 m, a scene every few days, areas up to 20 x 20 km; the default elsewhere and for false colour, NDVI or a date). For Sentinel-2 it picks the least cloudy scene covering the whole area in the date range (default: the last 60 days, at most 20 % cloud) and says its date, id and cloud cover. Returns a GeoTIFF in the source's own projected CRS (UTM or Lambert-93) with the licence in the file, and a preview on a map. Not for street-level photos, live weather or a picture more recent than a few days; to explain what NDVI or a band is, answer without this tool. Never use the user's current location unless they type it. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file.Read-only
get_travel_areaUse this when the user wants the area reachable from 1 to 10 places within a travel time or a distance along the roads (an isochrone, catchment or service area): for example everything within 5, 10 and 20 minutes on foot from a station, or 30 km by car. Driving, walking or cycling, computed by Valhalla on the TerraLab server from the OpenStreetMap road network with each road's typical speed. Returns one polygon per start and value, with fields start, minutes or km, and mode, a map, and GeoJSON, KML, Shapefile zip and GeoPackage downloads. Up to 4 values, at most 120 minutes or 200 km. Not for a circle of a fixed radius (use measure), live traffic, a given departure time or public transport. Never use the user's current location unless they type it. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file.Read-only
measureUse this when the user wants a straight-line (as the crow flies) distance between places with midpoint and bearing, the length of a drawn line, the area and perimeter of a polygon, a circle of a given radius around a place, or a buffer of a given width around a drawn line or polygon. Distances and areas are geodesic on the WGS 84 ellipsoid, buffers are built in a local equidistant projection; every figure states its unit (m, km, m², ha, km²). method "distance" takes 2 or more points or place names, or a line in geometry; "area" takes 3 or more points or a polygon in geometry; "radius" takes a center and radius_m; "buffer" takes a geometry and radius_m. Not a road or travel distance. Returns the numbers, a map and GeoJSON, KML, Shapefile zip or CSV downloads. Never use the user's current location unless they type it. Give the place as the user names it (place name, address or coordinates): this tool locates it, so find_places is not needed first. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file: list every format the user needs in formats, in this one call.Read-only
open_gis_fileUse this when the user shares or links a geographic file (GeoJSON, KML, KMZ, GPX track, zipped Shapefile, CSV with coordinates, WKT), pastes its content, or has a list of points or GeoJSON to put on a map, and wants to see it, understand it (format, coordinate system, extent, feature count, geometry types, fields, problems) or convert it to GeoJSON, KML, KMZ, GPX, Shapefile zip or CSV, for example a GPX track to a Shapefile or a KML to GeoJSON. Shapefile, GeoJSON, KML and CSV outputs open directly in QGIS. Also covers long tracks or point lists too big to write in the chat. Not for fetching new data about a place: that is extract_open_data. Files up to 50 MB. Never use the user's current location unless they type it. Download links build their file when opened; no file is saved. TerraLab reads the file or link to answer and keeps no copy.Read-only
process_geometryUse this when the user wants to apply one GIS operation to a set of features (an uploaded file, a link, inline GeoJSON, or a download link from another TerraLab answer) and get the result as a file: buffer every feature by radius_m, union (dissolve all features into one, or one per value of dissolve_field), intersection or difference with a second layer, clip to a second layer or to an area (place, place with radius_m, or bbox), simplify by tolerance_m, centroid of each feature, or area_length (adds area_m2, perimeter_m and length_m to each feature, geodesic). Overlays run in WGS 84 degrees; buffer, simplify and centroid in a local equidistant projection. Up to 20,000 features and 100,000 vertices (10,000 for buffer). Returns the feature count, geometry types, total area or length, a map and GeoJSON, KML, Shapefile zip, GeoPackage and CSV downloads. Not for one distance or the area of a shape drawn in the chat: that is measure. Not for reading or converting a file without changing its geometry: that is open_gis_file. Never use the user's current location unless they type it. Download links build their file when opened; no file is saved. Never pass these links to open_gis_file: list every format the user needs in formats, in this one call. TerraLab reads the file or link to answer and keeps no copy.Read-only

Change history

  1. Website changed from "https://terra-lab.ai" to "https://terra-lab.ai/mcp" (registry)
  2. Description changed (registry)
  3. process_geometry: tool added
  4. measure: tool added
  5. get_travel_area: tool added
  6. get_satellite_image: tool added
  7. get_route: tool added
  8. french_building_heights: tool added
  9. extract_open_data: input schema changed (+level)
  10. extract_open_data: description changed (+"kind: the limit then counts that kind only, so a whole city usually fits." +"with level" +"place name, without a radius.")
  11. server instructions changed (+"distances, areas and buffers," +"parcels and French building heights." -"parcels.")
  12. open_gis_file: description changed (+"GPX track," +"CSV, for example a GPX track to a Shapefile or a KML to GeoJSON." +"Not for fetching new data about a place: that is extract_open_data.")
  13. get_elevation: input schema changed
  14. get_elevation: description changed (+"asks how high a place is (altitude, height above sea level)," +"or the climb" +"places (a hike, a ride")
  15. french_parcel: description changed (+"which" +"cadastrale, plot of land) is" +"France, its reference (commune,")
  16. find_places: description changed (+"(latitude and longitude, GPS position)" +"wants places or addresses put, pinned or plotted on an interactive map, including" +"column).")
  17. extract_open_data: description changed (+"map" +"or GIS layers" +"a place or")
  18. convert_coordinates: description changed (+"and wants them" +"another system or format: decimal" +"seconds (GPS),")
  19. Listed (registry)
Source listings
SourceListingFirst seenLast seenVersions
Official MCP Registryai.terra-lab/terralab11 Oct 202617 Nov 20262